Taurus V6-3.0L DOHC VIN S (2000)
3. From behind the safety belt guide, release the tabs on each side and carefully pull out and remove the safety belt guide cover.
NOTE: If the safety belt guide cover is damaged or if it does not remain closed, install a new cover.
4. Remove the front row safety belt guide.
1
Using special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the front row safety belt guide.
5. Remove the front safety belt anchor.
1
Raise the safety belt anchor boot.
2
Using special tool 501-010 (T77L-2100-A), remove the bolt.
3
Remove the safety belt anchor.
6. Pull out to release the retaining clips and remove the upper B-pillar trim panel.