Taurus V6-3.0L DOHC VIN S (2000)
6. Pull out to release the retaining clips and remove the upper B-pillar trim panel.
7. Separate the lower B-pillar trim pane] at the retaining button.
8. Pull up and out to release the retaining clips, route the safety belt out and remove the lower B-pillar trim panel.
9. Push in and pull up to release the second row seat cushion and remove the cushion.
10. Remove the trim pad.
1
Remove the retaining screw.
2
Position the seat back downward.
3
Lift to release the retaining clips and pull out to remove the trim pad.
11. Remove the third row seat cushion.
12. Remove the third row retractor safety belt anchor.
1
Remove the bolt.
