Taurus V6-3.0L DOHC VIN S (2000)
17. Release the retainers at the back, pull to release the clips retaining the back half of the quarter trim to the front half, and remove the rear half of the
quarter trim panel.
18. Separate the front half of the quarter trim panel from the body.
1
Remove the screw.
2
Pull out to release the clips at the C-pillar and separate the front half of the quarter trim panel from the body.
Passenger side
19. Pull out to release the retaining clips and remove the D-pillar trim panel.
20. Separate the quarter trim panel from the body.
1
Remove the retaining screws.
2
Pull out to release the retaining clips at the C-pillar, lift the storage compartment up and out, and separate the quarter trim panel from the body.
Both sides