Taurus V6-3.0L DOHC VIN S (2000)
21. Attach the restraint system diagnostic tool to the vehicle harness side of the four-pin air bag sliding contact electrical connector.
22. Remove the passenger air bag.
23. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag electrical connector.
24. Reconnect the battery ground cable.
25. With the restraint system diagnostic tools installed at all of the deployable devices, prove out the supplemental air bag system.
26. Disconnect the battery ground cable and wait at least one minute.
All seats
27. Release the seat cushion trim cover side J-clips.
28. Disconnect and route the safety belt buckle and pretensioner electrical connector and wire harness out from under the seat.
