Taurus V6-3.0L DOHC VIN S (2000)
2. Route the safely belt buckle and pretensioner electrical connector and wire harness between the seat cushion frame and the seat track.
3. Connect the safety belt buckle and pretensioner electrical connector.
4. Reposition the seat cushion trim cover over the safety belt buckle and pretensioner and attach the J-clips.
5. Remove the Driver Safety Belt Pretensioner Restraint System Diagnostic Tool from the ten-pin floor electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE CAN RESULT IN INJURY AND POSSIBLE VIOLATION OF VEHICLE
SAFETY STANDARDS.
