Taurus V6-30L DOHC VIN S (2000) Safety Belt Tensioner Service and Repair
21. Remove the lower steering column opening cover with reinforcement.
1
Remove the retaining bolts.
2
Pull out to release the retaining clips and remove the lower steering column opening cover with reinforcement.
22. Disconnect the four-pin air bag sliding contact electrical connector at the base of the steering column.
23. Attach the restraint system diagnostic tool to the vehicle harness side of the four-pin air bag sliding contact electrical connector.
24. Reconnect the battery ground cable.
25. With the restraint system diagnostic tools installed at all of the deployable devices, prove out the supplemental air bag system.
26. Disconnect the battery ground cable and wait at least one minute.
All seats
27. Release the seat cushion trim cover side J-clips.
