Taurus V6-3.0L DOHC VIN S (2000)
21. Remove the restraint system diagnostic tool from the vehicle harness side of the four-pin air bag sliding contact electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE CAN RESULT IN INJURY AND POSSIBLE VIOLATION OF VEHICLE
SAFETY STANDARDS.
22. Connect the four-pin air bag sliding contact electrical connector at the base of the steering column.
23. Install the lower steering column opening cover with reinforcement.
1
Position the lower steering column opening cover with reinforcement to the instrument panel and push in at the top seating the retaining clips.
2
Install the retaining bolts.
24. Connect the battery ground cable.
25. Prove out the air bag system.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE CAN RESULT IN INJURY AND POSSIBLE VIOLATION OF VEHICLE
SAFETY STANDARDS.
26. Check the restraint system for correct operation.
