ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Power Seat Switch > < Manual Seats|Page 1159
Page 8
background image

20. Connect the four-pin air bag sliding contact electrical connector at the base of the steering column.

21. Install the lower steering column opening cover with reinforcement.

1

Position the lower steering column opening cover with reinforcement to the instrument panel and push in at the top seating the retaining clips.

2

Install the retaining bolts.

22. Connect the battery ground cable. For additional information, refer to Battery.
23. Prove out the air bag system. For additional information, refer to Air Bag Systems.

WARNING:  THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.

24. Check the restraint system for correct operation.

Power Seat Switch > < Manual Seats|Page 1159