Taurus V6-3.0L DOHC VIN S (2000)
2. Position the inner side shield to the seat.
2G3.
Install the outer side shield to the seat.
1
Position the outer side shield to the seat and push in where indicated to install the retaining clips.
NOTE: Route the power pedal (if equipped) and seat (if equipped) switch wire harnesses through the side of the seat while positioning the
outer side shield to the seat.
2
Squeeze the inner and outer side shields together to seat the clips.
4. Install the outer side shield screw.
5. Install the recliner handle.
