Taurus V6-3.0L DOHC VIN S (2000)
Mass Air Flow Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the air cleaner outlet tube. For additional information, refer to Fuel Delivery and Air Induction.
3. Remove the MAF sensor.
1
Disconnect the electrical connector.
2
Remove the four nuts and the MAF sensor.
CAUTION: The Mass Air Flow (MAF) is a calibrated unit. Service hot wire element and housing as a complete assembly.
INSTALLATION
1. To install, reverse the removal procedure.