Taurus V6-3.0L DOHC VIN S (2000)
Control Arm: Service and Repair
Rear Suspension
Lower Arm - Four Door
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in
major service expense. A new part with the same part number, or an equivalent part, must be installed if installation is necessary. Do not use a new
part of lesser quality or substitute design. Torque values must be used as specified to snake sure of correct retention of these parts.
All vehicles
1. Remove the hub cap or wheel cover.
2. Measure the distance from the center of the hub to the lip of the fender with the vehicle in a level, static ground position (curb height).
3. Remove the wheel and tire assembly.
Front lower control arms
4. Remove the bolt.
5. Detach the parking brake cable and, if so equipped, the rear anti-lock brake sensor wiring harness.
Front and rear lower control arms
