Taurus V6-3.0L DOHC VIN S (2000)
Front Steering Knuckle: Service and Repair
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in
mayor service expense. A new part with the same part number must be used if installation is necessary. Do not use a new part of lesser quality or
substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.
All vehicles
1. CAUTION: Discard the wheel hub retainer (3B477). It is a torque prevailing design and cannot be reused. If loosened, the retainer must be
removed and a new one installed.
Note: Make sure the steering wheel is in the unlocked position.
Remove the hub cap or wheel cover, the wheel hub retainer, and the washer. Discard the retainer.
2. Remove the front brake disc.
