Taurus V6-3.0L DOHC VIN S (2000)
6. Remove and discard the lower control arm-to-spindle flag bolts and nuts. Pull the wheel spindle out of the control arm and toward the rear of the
vehicle and remove the trackbar arm.
7. Remove the trackbar arm-to-spindle bushing, the body end inner bushing (5BS47), and the washers.
8. Note: The bushings at the front and rear of the trackbar are different sizes and shapes. Make sure the bushings are installed correctly.
Note: The cupped side of the washers must face away from the bushings.