Taurus V6-3.0L DOHC VIN S (2000)
Install the side cover, gasket and bolts.
10. For vehicles without the structural side pan, install the rear engine support bracket and bolts.
11. Note: For the 3.0L 4V with the structural side pan, it will be necessary to reinstall the left side of the subframe.
-
Install the LH transaxle support and insulator.
12. Install the LH front fender splash shield, screw, and pushpin.
13. Install the LH front fender splash shield screws.
14. Install the LH wheel and tire.
15. Lower the vehicle.
