Taurus V6-3.0L DOHC VIN S (2000)
Transmission Mount: Service and Repair
AX4S
Removal
1. Raise the vehicle.
2. Remove the LH wheel and tire.
3. Place the high lift transmission jack under the transaxle.
4. CAUTION: Do not excessively raise the engine. Over-extension of the tripod CV joint could result in separation of internal parts, causing
failure of the halfshafts.
Note: The transaxle will need to be raised to remove the transaxle support insulator.
Remove the engine and transmission support insulator.
1
Remove the nut.
2
Remove the bolts.
3
Raise the transaxle and remove the engine and transaxle support insulator.
5. Remove the rear engine support bracket.
Installation