Taurus V6-3.0L DOHC VIN S (2000)
Windshield Washer Pump: Service and Repair
Windshield Washer Pump
REMOVAL
1. Remove the RH front wheel. For additional information, refer to Wheels, Tires, and Alignment.
2. Remove the four screws, the pin-type retainer and remove the RH front inner fender well.
3. Disconnect the washer hose and the electrical connector from the washer pump.
WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL WHICH IS POISONOUS. OBSERVE ALL CAUTIONS
AND WARNINGS INDICATED ON LABEL OF WASHER SOLUTION CONTAINER.
NOTE: The windshield washer reservoir will drain when the washer hose is disconnected.
4. Remove the washer pump assembly by prying the pump out of the reservoir cavity with a small flat blade screwdriver.
INSTALLATION
1. To install, reverse the removal procedure.