Taurus V6-3.0L VIN 2 Flex Fuel (1997)
Keyless Entry Module: Service and Repair
Installation
1.
Align three fingers on bracket with tabs on replacement module.
2.
Slide module into bracket, verify all tabs are locked in position.
3.
Connect anti-theft system control and bracket assembly to wiring harness connector.
4.
Position anti-rotation tab on anti-theft system control and bracket assembly into slot in instrument panel.
5.
Install anti-theft system control and bracket assembly to instrument panel. Tighten retaining nuts to 6-8 N.m (53-70 lb-in).
6.
Perform key reprogramming procedure.