ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Campaign - Coolant By-Pass Kit Incorrect|Page 3299 > < Campaign - Coolant By-Pass Kit Incorrect|Page 3297
Page 14
background image

11.

Remove the A/C compressor brace upper retainer, then loosen the lower retainer. Swing the brace away from the water pump. Refer to Figure 4.

12.

Remove the power steering line support bracket retainer, then position the bracket away from the water pump. See Figure 4.

13.

Disconnect the coolant by-pass hose from the water pump and heater core return tube. See Figure 5.

14.

Position the drain pan under the water pump.

Campaign - Coolant By-Pass Kit Incorrect|Page 3299 > < Campaign - Coolant By-Pass Kit Incorrect|Page 3297