Taurus V6-3.0L VIN 2 Flex Fuel (1997)
Oil Pressure Sender: Service and Repair
REMOVAL
1. Disconnect the engine control sensor wiring from the oil pressure sensor.
2. Remove the oil pressure sensor from the cylinder block.
INSTALLATION
NOTE: Apply Pipe Sealant with Teflon(R) D8AZ-19554-A or equivalent meeting Ford specifications ESR-M18P7-A and WSK-M2G350-AZ
prior to installation.
1. Follow removal procedure in reverse order.
2. Tighten to 16-22 Nm (12-16 ft. lbs.).
