Taurus V6-3.0L VIN 2 Flex Fuel (1997)
Heater Core: Service and Repair
REMOVAL
1. Remove instrument panel, refer to Body and Frame/Interior Trim/ Dash Board/Service and Repair/ See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair
NOTE: If a heater core leak is suspected, the heater core must be leak tested before it is removed from the vehicle.
2. Drain coolant from radiator into a clean container.
3. Disconnect heater water hoses from heater core. Plug heater core tubes or blow any coolant from heater core with low pressure air.
4. Remove four retaining screws and A/C electronic blend door actuator from A/C evaporator housing.
