ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 11388 > < Initial Inspection and Diagnostic Overview|Page 11386
Page 8
background image

NOTE:  The ignition switch must be in RUN position or test will fail.

2. Rotate dial to menu item "Diagnostic Data Link" and press trigger.
3. Select module to test by rotating dial to highlight module and press trigger.
4. Menu item "Diagnostic Test Modes" is highlighted. Press trigger.
5. Rotate dial to highlight menu item "Wiggle Test." Press trigger, then press start (Button 3).

Initial Inspection and Diagnostic Overview|Page 11388 > < Initial Inspection and Diagnostic Overview|Page 11386