Taurus V6-3.0L VIN 2 Flex Fuel (1997)
SERVICE PROCEDURE
1.
Perform normal diagnostics as outlined in the 1998 Powertrain Control/Emissions Diagnosis (PC/ED) On-Board Diagnostics II (OBD-II) Service
Manual and service as required.
2.
If the concern is still present, reprogram the PCM using the 12/1998 or later CD-ROM, Service Bay Diagnostic System (SBDS), or New
Generation Star (NGS) Tester.
NOTE
PCM REPLACEMENT IS NOT AUTHORIZED BY THIS TSB. REFER TO THE POWERTRAIN CONTROL/EMISSIONS DIAGNOSIS
(PC/ED) SERVICE MANUAL FOR APPROPRIATE DIAGNOSTIC PROCEDURES IF PCM HARDWARE CONCERNS EXIST.
Obtain an Authorized Modifications Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of
modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized
Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.
OTHER APPLICABLE ARTICLES: 98-13-7
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
990105A
Reprogram Powertrain
0.6 Hr.
Control Module (PCM)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECAL
42
OASIS CODES: 608400, 615000, 615500, 615600, 698298