Taurus V6-3.0L VIN 2 Flex Fuel (1997)
NOTE: The top surface of the rear window trim panel has a soft finish material for appearance and a rigid backing material directly beneath for
strength.
5. Poke through the soft material and probe the area between the dotted lines to find one of the two existing perforations in the rigid backing material
directly underneath the dotted lines on template. Carefully cut out both the soft material and aligned rigid material beneath.
CAUTION: Do not exceed the boundaries of the perforation or the trim panel may be permanently damaged and require replacement.
NOTE: Perforation is found when the knife meets no resistance.
6. Select the correct size (long) tether strap anchor bracket from the kit.
7. Insert the anchor bracket through the access opening in the trim panel and slide it downward and rearward as far as it will go to correctly position
