Taurus V6-3.0L VIN 2 Flex Fuel (1997)
10. Repeat Steps 5 through 9 for opposite side of vehicle.
11. Reinstall parking brake cable bracket.
12. Align rear wheels.
Toe, Rear
1. Place vehicle on alignment rack.
Part 1 Of 2
Part 2 Of 2
2. Reset rear toe to nominal specification of +0.06° (+0.031 inch) toe-in for each individual wheel.
a. Loosen lower arm pivot nut approximately one turn.
b. Adjust camber to achieve toe setting by rotating cam head.
c. Hold cam bolt head in position with a back-up wrench and tighten inner pivot nut to 68-92 Nm (50-67 ft. lbs.).
CAUTION: Use care when tightening so as not to disturb cam/alignment setting.
Camber, Rear