Taurus V6-3.0L VIN 2 Flex Fuel (1997)
3. Remove the nylon power steering oil reservoir by twisting side-to-side and lifting.
CAUTION: Do not hammer on the power steering oil reservoir or damage to power steering oil reservoir will occur.
4. Discard O-ring seal on power steering pump housing.
INSTALLATION
1. Install a new O-ring seal on the power steering pump housing.
CAUTION: Do not twist the O-ring seal as it will stick, grab, bind or leak.
2. Apply petroleum jelly to the reservoir O-ring seal and the inside edge of the power steering oil reservoir.
3. Place the power steering oil reservoir over the power steering pump and align the outlet fitting hole in the power steering oil reservoir with the
