Taurus V6-3.0L VIN 2 Flex Fuel (1997)
11.
Install retaining nuts that secure the front engine support insulators to the front subframe. Tighten to 77-103 N.m (57-75 lb-ft).
12.
Connect front suspension lower arms with retaining nuts to ball joints. Tighten retaining nuts to 68-92 N.m (51-67 lb-ft).
13.
Install dual converter V pipe.
14.
Install tires and wheels.
15.
Lower hoist.
16.
Remove Three Bar Engine Support D88L-6000-A or equivalent and engine lifting eyes.
17.
Connect battery ground cable.
18.
Check front end alignment. Adjust if necessary.
