Taurus V6-3.0L VIN 2 Flex Fuel (1997)
3. Install clutch pack, clutch pressure plate, clutch wave spring and clutch pressure plate retainer snap ring.
NOTE: Be sure step on clutch pressure plate faces up.
Measuring Intermediate Clutch Pack Clearance
4. Check clutch pack clearance using Dial Indicator with Bracketry TOOL-4201-C or equivalent. Push firmly downward on the clutch pack. Release
pressure and zero the dial indicator. Lift pressure plate to the bottom of the clutch pressure plate retainer snap ring. Note dial indicator reading.
Take two readings, 180° apart, and determine the average of the two readings. The clearance should be: (4-plate) 1.14-1.70 mm (0.045-0.067
inch). If the clearance is not within specification, selective snap rings are available in the following thickness:
Thickness: Part Number
1.20-1.30 mm (0.047-0.051 inch): E7DP-7G346-AA
1.67-1.77 mm (0.066-0.070 inch): E7DP-7G346-BA
2.14-2.24 mm (0.084-0.088 inch): E7DP-7G346-CA
2.61-2.71 mm (0.103-0.107 inch): E7DP-7G346-DA
3.04-3.14 mm (0.120-0.124 inch): E7DP-7G346-EA
Assembly
WITH AX4N
