Taurus V6-3.0L VIN 2 Flex Fuel (1997)
Measuring Reverse Clutch Pack Clearance
5. Check clutch pack clearance using feeler gauge or Dial Indicator with Bracketry TOOL-4201-C or equivalent. Push firmly downward on the clutch
pack. Release pressure and zero dial indicator. Lift pressure plate to the bottom of the clutch pressure plate retainer snap ring. Note dial indicator
reading. Take two readings, 180° apart, and determine the average of the two readings. The clearance should be: 0.97-1.63 mm (0.038-0.064
inch). If the clearance is not within specification, selective snap rings are available in the following thickness. After installing the correct snap ring,
check the clearance.
Thickness: Part Number
1.52-1.62 mm (0.059-0.064 inch): N808185-S
1.98-2.08 mm (0.078-0.081 inch): N808186-S
2.45-2.55 mm (0.096-0.100 inch): N808187-S
2.92-3.02 mm (0.115-0.118 inch): N808188-S
Disassembly