Taurus V6-3.0L VIN 2 Flex Fuel (1997)
5. Remove clutch spring compressor. Install wave spring, clutch pack, clutch pressure plate and clutch pressure plate retaining ring.
6. Air check clutch assembly for proper operation.
WARNING: To prevent injury, wear eye protection when using pressurized air.
NOTE: Be certain that shop air is dry and regulated at 276 kPa (40 psi).
7. Check clutch pack clearance using feeler gauge. Take two readings, 180° apart, and determine the average of the two readings. The clearance
should be: 0.97-1.63 mm (0.038-0.064 inch).