Taurus V6-3.0L VIN 2 Flex Fuel (1997)
Drive Chain: Service and Repair
Chain Cover
With AX4N Transmission
DISASSEMBLY
1. If wiring or chain cover replacement is necessary, compress tabs on both sides of connector from inside of chain cover. Pull connector and harness
out of chain cover.
CAUTION: Do not pull on wiring. Pull on connector or wires may be pulled from connector. Be careful not to cut or damage wire insulation or
connector.
2. Remove No. 1 drive sprocket thrust washer and No. 3 chain cover thrust washer from chain cover.
3. Remove bolt and manual valve detent spring.
