Taurus V6-3.0L VIN 2 Flex Fuel (1997)
1. If removed, press driven sprocket bearing using an arbor press, Stator and Driven Sprocket Bearing Replacer T86P-70043-B, and Driver Handle
T80T-4000-W.
Seal Ring Installation
2. Install No. 5 thrust washer to driven sprocket support. Use petroleum jelly to hold washer in place. Install five new Teflon seal rings on driven
sprocket support.
CAUTION: Seal rings must be installed correctly.
With AX4S Transmission
DISASSEMBLY
