ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A Pillar/Windshield - Wind Noise|Page 10781 > < A Pillar/Windshield - Wind Noise|Page 10779
Page 3
background image

2.

Check for a foam blocker underneath the windshield moulding on both sides of the vehicle at the base of the A-pillar (Figure 2). If foam blocker is
not present, fill the section under the windshield moulding with RTV sealer (60 mm long starting 50 mm above the base of the A-pillar).

3.

Drive the vehicle to verify the repair.

PART NUMBER

PART NAME

F6DZ-5420556-BC

Cutline Seal - RH

F6DZ-5420557-BC

Cutline Seal - LH

(Obtain Locally)

RTV Sealer

A Pillar/Windshield - Wind Noise|Page 10781 > < A Pillar/Windshield - Wind Noise|Page 10779