Taurus AWD V6-3.5L (2009)
3. NOTE:
-
Make sure the arrow on the Rear Drive Unit (RDU) Bushing Remover/Installers is visible on the bottom and facing away from the subframe.
The arrow must remain straight so that the bushings are correctly indexed into the subframe.
-
When installing the RDU bushing, the Rear Drive Unit (RDU) Bushing Remover/Installers will fall away as the RDU bushing is installed into
the subframe. The Rear Drive Unit (RDU) Bushing Remover/Installers do not control the depth of the bushing. The RDU bushing is fully
seated when the Rear Drive Unit (RDU) Bushing Remover/Installer falls away from the subframe. Do not continue to tighten the Rear Drive
Unit (RDU) Bushing Remover/Installer.
Install the RDU bushing into the subframe.
4. Install the RDU.
