Taurus AWD V6-3.5L (2009)
110. Install the 2 lower battery tray bracket bolts.
-
Tighten to 9 Nm (80 lb-in).
111. Attach the 2 pin-type wiring harness fasteners to the front of the battery tray.
112. Attach the 4 pin-type wiring harness fasteners to the side of the battery tray.
113. Install the battery.
114. Install the engine air cleaner and air cleaner outlet pipe.
115. Install the degas bottle.
116. Connect the power steering cooler tube.
117. Install the LH halfshaft and the RH halfshaft.
118. Install the accessory drive belt and the power steering belt.
119. NOTICE: Do not expose the Motorcraft High Performance Engine RTV Silicone to engine oil for at least 90 minutes after installing the
engine front cover. Failure to follow this instruction may cause oil leakage.
Fill the engine with clean engine oil.