Taurus AWD V6-3.5L (2009)
3. Using a new gasket, install the LH valve cover and 11 stud bolts.
-
Tighten in the sequence shown to 10 Nm (89 lb-in).
4. Connect the 3 LH fuel injector electrical connectors.
5. Attach all of the wiring harness retainers to the LH valve cover stud bolts.
6. Connect and attach the 2 engine control wiring harness electrical connectors.
7. Connect the LH VCT solenoid electrical connector.
8. Install the oil level indicator.
9. Install the LH ignition coils.
