Taurus AWD V6-3.5L (2009)
20. Disconnect the LH VCT solenoid electrical connector.
21. Disconnect the 3 LH coil-on-plug electrical connectors.
22. Detach all of the wiring harness retainers from the LH valve cover and stud bolts.
23. NOTE: LH shown, RH similar.
Remove the 6 bolts and the 6 coil-on-plugs.
24. NOTE: The A/C compressor must remain bolted to the cylinder block prior to installing the oil pan.
Remove the A/C compressor nut and stud.
25. Remove the PSP tube bracket-to-power steering pump bolt.
