Taurus AWD V6-3.5L (2009)
Install the oil pan and bolts 10, 11, 13 and 14.
-
Tighten in the sequence shown to 3 Nm (27 lb-in).
-
Loosen the bolts 180 degrees.
3. Align the oil pan to the cylinder block and A/C compressor.
-
Position the oil pan so the mounting boss is against the A/C compressor and using a straightedge, align the oil pan flush with the rear of the
cylinder block at the 2 areas shown.
4. Tighten bolts 10, 11, 13 and 14 in the sequence shown, to 3 Nm (27 lb-in).
5. Install the remaining oil pan bolts. Tighten all the oil pan bolts in the sequence shown.
-
Tighten the large bolts (1-14) to 20 Nm (177 lb-in).
