Taurus AWD V6-3.5L (2009)
35. Remove the A/C tube retaining clamp bolt.
36. Remove the A/C tube-to-evaporator bolt and the 2 A/C tubes.
-
Discard the O-ring seals.
37. Using the floor jack, raise the engine slightly.
38. Remove the 22 engine front cover bolts.
39. Install 6 of the engine front cover bolts (finger tight) into the 6 threaded holes in the engine front cover.
-
Tighten the bolts one turn at a time in a crisscross pattern until the engine front cover-to-cylinder block seal is released.
-
Remove the engine front cover.