Taurus AWD V6-3.5L (2009)
No
REFER to Steering Column to diagnose the input from the ignition switch. See: Steering and Suspension/Steering/Steering Column/Testing and
Inspection
-------------------------------------------------
Y4 CHECK THE TRANSAXLE GEAR INPUT
-
Enter the following diagnostic mode on the scan tool: PCM DataLogger.
-
Monitor the PCM transmission gear status PID (TR) while placing the gear selector lever through all its positions.
-
Does the PID agree with the gear selection?
Yes
GO to Y5.
No
REFER to Transmission Control Systems to diagnose the transmission range input. See: Powertrain Management/Transmission Control Systems/Testing
and Inspection
-------------------------------------------------
Y5 CHECK THE SJB FOR DRL CONFIGURATION
-
Enter the following diagnostic mode on the scan tool: SJB Module Programming.
-
Check the SJB configuration and make sure the DRL feature is enabled.
-
Is the SJB DRL configuration enabled?
Yes
INSTALL a new SJB. TEST the system for normal operation.
No
ENABLE the DRL configuration. TEST the system for normal operation.
-------------------------------------------------
