ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2726 > < Initial Inspection and Diagnostic Overview|Page 2724
Page 54
background image

-

Are the resistances greater than 1,000 ohms?

Yes

CONNECT the battery ground cable. GO to S31.

No

GO to S22.

-------------------------------------------------
S22 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE ABS MODULE DISCONNECTED

-

Disconnect: ABS Module C135.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and ground; and between the DLC C251-14, circuit
VDB05 (WH), harness side and ground.

-

Are the resistances greater than 1,000 ohms?

Yes

CONNECT the battery ground cable. GO to S32.

No

GO to S23.

-------------------------------------------------
S23 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE STEERING EFFORT CONTROL
MODULE (SECM) DISCONNECTED

-

Disconnect: SECM C2368.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Are the resistances greater than 1,000 ohms?

Yes

CONNECT the battery ground cable. GO to S33.

No

GO to S24.

-------------------------------------------------
S24 VERIFY VEHICLE EQUIPMENT - 4X4 CONTROL MODULE

Initial Inspection and Diagnostic Overview|Page 2726 > < Initial Inspection and Diagnostic Overview|Page 2724