Taurus AWD V6-3.5L (2009)
10. Release the 2 retaining tabs on each driver air bag module and disconnect the electrical connectors.
11. Remove the driver air bag module.
Installation
WARNING: Prior to reinstalling a previously removed driver air bag module, make sure to correctly position the wire clip that retains the
driver air bag module to the steering wheel. Failure to follow this instruction will result in incorrect installation of the driver air bag module
and increases the risk of serious personal injury or death in a crash.
NOTICE: Steering wheel components are not serviceable. Make sure that the wire clips are positioned and attached correctly to the steering
wheel. If any components are damaged, a new steering wheel must be installed.
1. Make sure the wire clips are correctly positioned to the steering wheel as shown in the illustration.