Taurus AWD V6-3.5L (2009)
4. Roll down the trim cover and install the third row of hog rings front and rear (backside hog rings shown).
5. Roll down the seat trim cover to the side air bag module.
6. Feed the side air bag module backrest trim cover chute and J-clip retainer back through the side air bag module backrest foam pad opening.
7. Install the side air bag module backrest trim cover chute and attach the J-clip retainers.
8. Attach the J-clips at the back of the trim cover.
9. Attach the hook-and-loop strips, and roll the seat back trim cover down and install the second row of hog rings.
10. Attach the hook-and-loop strips, and roll the seat back trim cover down and install the first row of hog rings.
-
On the passenger seat, pull the backrest fold flat nylon release strap through the trim cover bezel opening.
