Taurus AWD V6-3.5L (2009)
10. Remove the 8 cushion frame-to-pivot tube assembly bolts.
-
To install, tighten to 50 Nm (37 lb-ft).
11. Remove the cushion frame joining bracket and cushion frame.
12. Remove the bolt and the affected safety belt buckle.
-
To install, tighten to 37 Nm (27 lb-ft).
13. NOTE: Make sure the anti-rotation tab is in place before tightening fastener.
To install, reverse the removal procedure.
14. Check the active restraint system for correct operation. For additional information, refer to the appropriate Functional Test procedure in Safety
Belt System See: Testing and Inspection/Component Tests and General Diagnostics.
