Taurus AWD V6-3.5L (2009)
6. Remove the floor console finish panel.
7. Remove the LH floor console trim panel in the following sequence.
1. Pull the floor console trim panel outward to release the retaining clips.
2. Pull the front of the floor console trim panel downward to detach the trim panel from the pin-type retainers.
3. Remove the floor console trim panel.
-
Disconnect the connector for the LH floor console trim panel.
8. Disconnect the selector lever cable from the selector lever.
9. Remove the selector cable from the selector lever cable bracket.
10. NOTE: Console removed for clarity.
Disconnect the selector lever cable retainer from the floor and route the cable out from under the heater housing.
11. Remove the selector lever cable grommet nuts at the bulkhead.