Taurus AWD V6-3.5L (2009)
10. Remove the battery.
11. Detach the wiring harness retainers from the battery tray.
12. Remove the 2 lower battery tray bracket bolts.
13. Remove the upper battery tray bolt and nut. Release the Power Distribution Box (PDB) fasteners. Remove the battery tray and bracket.
14. NOTICE: The Oil Pan Holding Fixture must be carefully aligned to the mounting bosses on the oil pan. Failure to follow these
instructions may result in damage to the oil pan.
Position a floor jack and the Oil Pan Holding Fixture under the oil pan and raise the floor jack high enough to release the pressure on the transaxle
support insulator.
15. Remove the transaxle support insulator through bolt.