Taurus AWD V6-3.5L (2009)
Apply a new continuous bead of clear silicone rubber as shown in the illustration.
3. Install the differential housing cover and the 10 bolts.
-
Tighten to 23 Nm (17 lb-ft).
4. Remove the filler plug and fill the rear axle with 1.15L (2.43 pt) of rear axle lubricant, 3-5mm (0.118-0.196 in) below the bottom of the filler hole.
Install the filler plug.
-
Tighten to 29 Nm (21 lb-ft).
5. If equipped, install the exhaust insulator located near the differential housing cover.