Taurus AWD V6-3.5L (2009)
Wheel Bearing: Service and Repair
Rear Suspension
Wheel Bearing and Wheel Hub
All-Wheel Drive (AWD) Vehicles
Front Wheel Drive (FWD) Vehicles
Removal and Installation
All vehicles
1. Remove the brake disc.
2. Remove and discard the wheel bearing and wheel hub bolts.
-
To install, tighten the new bolts to 120 Nm (89 lb-ft).
3. If equipped, remove the wheel speed sensor bolt and position the sensor aside.
-
To install, tighten to 15 Nm (133 lb-in).
All-Wheel Drive (AWD) vehicles
4. Remove and discard the wheel hub nut.
-
To install, tighten the new nut to 350 Nm (258 lb-ft).