Taurus AWD V6-3.5L (2009)
Windshield: Service and Repair
Glass Reseal - Windshield
Glass Reseal - Windshield
1. Remove the cowl panel grille.
2. Position the LH and RH weatherstrips aside.
3. Remove the LH and RH A-pillar trim panels.
4. Remove the LH and RH sun visors.
5. If equipped, remove the overhead console.
6. Remove the LH and RH assist handle.
7. Lower the front headliner and block with a suitable material.
8. Clean the interior and exterior of the windshield glass surface with glass cleaner.
9. Cut the urethane adhesive applicator tip to 6 mm (0.24 in).
10. NOTE: Use either a high-ratio, electric or battery-operated caulk gun that will apply the urethane adhesive with less effort and a continuous bead.
NOTE: Make sure there are no gaps in the urethane bead.
Apply urethane adhesive over top of the existing urethane adhesive.
