Taurus FWD V6-3.5L (2008)
new roof opening panel glass has been installed or a new roof opening panel assembly has been installed. For additional information, refer to Roof
Opening Panel Motor Initialization. See: Testing and Inspection/Programming and Relearning
-
Anytime a roof opening panel motor is removed, the cables/mechanisms can experience free-play movement. It is important that the cables do not
move. They are timed to be parallel with each other. If one or both are moved in either direction, they must be re-timed. For additional
information, refer to Timing Adjustment. See: Adjustments/Timing Adjustment
1. Remove the headliner.
2. Disconnect the 4 roof opening panel drain hoses from the corners of the roof opening panel frame.
3. NOTE: To avoid damage to the roof opening panel frame, be sure to support the roof opening panel frame when removing the roof opening panel
frame bolts.
Remove the 12 roof opening panel frame bolts.
-
To install, tighten to 6 Nm (53 lb-in).
4. Remove the roof opening panel frame.
5. To install, reverse the removal procedure.
-
Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization. See: Testing and
Inspection/Programming and Relearning
