Taurus FWD V6-3.5L (2008)
-
Pull the strap through the trim cover.
6. Remove the backrest foam pad.
7. For 50 percent backrest, remove the bushing.
8. To assemble, reverse the disassembly procedure.
60 Percent
SEAT BACKREST - REAR, 60 PERCENT
Disassembly and Assembly
1. Remove the rear seat cushion.
2. Remove the 60 percent rear seat backrest.
3. Push in on the head restraint adjust button and remove the head restraint assembly.
4. Remove the screw and the armrest bracket outboard cover.
5. Remove the armrest bolt and spacer.
-
To install, tighten to 23 Nm (17 lb-ft).